Products

G1 - Non Flame Retardant Polyolefin Tubing

G1 - Non Flame Retardant Polyolefin Tubing

Applications:
G1 is a non flame retardant polyolefin heat shrinkable tubing with the properties of thin wall, halogen free, glossy surface, good transparency and rapid shrinkage at low temperatures. It is widely used in outer insulation protection of electronics and consumer goods. The clear color makes it high transparency, so the condition of covered objects can be checked clearly.
Operating temperature range:
  • Continuous operating temperature: -55℃ ~ 105℃
  • Minimum shrink temperature : 70℃
  • Full recovery temperature : Above 100˚C
顏色:

C

Standard color :Clear

Inquiry
  • Characteristics
  • Specification
  • Technical Data
  • Shrink ratio: 2:1
  • Low shrink temperature
  • Good transparency flexible
  • Compliance with RoHS
Part NumberNominal Size(mm)As supplied(mm)After recovered(mm)Standard Length(Meter)
I.D.W.T.I.D.(max)W.T.(min)
G1-0010 1.0 1.5±0.3 0.20±0.05 0.7 0.33 200
G1-0015 1.5 2.0±0.3 0.20±0.05 0.8 0.34 200
G1-0020 2.0 2.5±0.3 0.20±0.05 1.1 0.34 200
G1-0025 2.5 3.0±0.3 0.25±0.05 1.25 0.42 200
G1-0030 3.0 3.5±0.3 0.25±0.05 1.5 0.42 200
G1-0035 3.5 4.0±0.3 0.25±0.05 1.75 0.42 200
G1-0040 4.0 4.5±0.3 0.25±0.05 2.0 0.42 200
G1-0045 4.5 5.0±0.3 0.25±0.05 2.25 0.42 100
G1-0050 5.0 5.5±0.3 0.28±0.05 2.5 0.52 100
G1-0060 6.0 6.5±0.3 0.28±0.05 3.0 0.52 100
G1-0070 7.0 7.6±0.3 0.30±0.07 3.5 0.56 100
G1-0080 8.0 8.6±0.3 0.30±0.07 4.0 0.56 100
G1-0090 9.0 9.6±0.3 0.30±0.07 4.5 0.56 100
G1-0100 10.0 10.7±0.4 0.30±0.07 5.0 0.56 100
G1-0110 11.0 11.7±0.4 0.30±0.07 5.5 0.56 100
G1-0120 12.0 12.7±0.4 0.30±0.07 6.0 0.56 100
G1-0130 13.0 13.7±0.4 0.35±0.08 6.5 0.69 100
G1-0140 14.0 14.7±0.4 0.35±0.08 7.0 0.69 100
G1-0150 15.0 15.7±0.5 0.35±0.08 7.5 0.69 100
G1-0160 16.0 16.7±0.5 0.35±0.08 8.0 0.69 100
G1-0170 17.0 17.7±0.5 0.35±0.08 8.5 0.69 100
G1-0180 18.0 19.0±0.5 0.40±0.10 9.0 0.77 100
G1-0200 20.0 21.0±0.5 0.40±0.10 10.0 0.77 100
G1-0220 22.0 23.0±0.5 0.40±0.10 11.0 0.77 100
G1-0250 25.0 26.0±1.0 0.45±0.10 12.5 0.87 50
G1-0280 28.0 29.0±1.0 0.45±0.10 14.0 0.87 50
G1-0300 30.0 31.5±1.0 0.45±0.10 15.0 0.87 50
G1-0350 35.0 36.5±1.0 0.50±0.10 17.5 0.97 50
G1-0400 40.0 42.0±1.5 0.50±0.10 20.0 0.97 50
G1-0450 45.0 47.0±1.5 0.50±0.10 22.5 0.97 25
G1-0500 50.0 53.0±2.0 0.55±0.10 25.0 0.97 25
G1-0600 60.0 63.0±3.0 0.60±0.15 30.0 1.17 25
PropertySpecification RequirementTest MethodTypical Value
Concentricity

≥70%

ASTM D2671

≥70%

Tensile strength

≥10。3MPa

ASTM D2671

≧14.0MPa

Elongation at break

≥200%

ASTM D2671

≧400%

Dielectric voltage withstand

AC2500V/60S
No breakdown

ASTM D2671

No breakdown
Volume resistivity

≥1014Ω‧cm

ASTM D2671

≧1014Ω‧cm

 

真人棋牌娱乐 天易彩票注册 手机网投平台网址 北京体彩网 牛牛赌博 澳门网上真人赌场 顶级手机网投 游戏手机网投 全球彩票开户 澳门最大赌场